-
About UsHebei Longmai Pump Industry Co., Ltd. is a professional manufacturer of industrial water pumps. The company covers an area of 137,500 square meters, employs 219 people, and has a registered capital of 30 million.
-
Several tips to promote energy saving and consumption reduction of submersible pumps
2017-08-30
Energy conservation and emission reduction is a theme advocated in modern times. So, how can energy-saving requirements be met in the installation and use of submersible pumps? Longmai Pump Industry shares the following based on its years of production and R&D experience. 1. Install the pump at an angle and reduce elbows. Install the submersible pump at an angle or turn the volute so that the outlet is directly facing the water pool. 2. Shorten the pipeline. Removing 1 meter of steel pipe can save 0.21 kg of diesel in 10 hours. 3. Increase the diameter of the outlet pipe. Replacing a 4-meter-long 10cm outlet hose with a 15cm pipe can save 0.5 kg of diesel in 10 hours. 4. If the water intake can remain clean, the filter can be removed.
Energy conservation and emission reduction is a theme advocated in modern times. So, how can energy-saving requirements be met in the installation and use of submersible pumps? Longmai Pump Industry shares the following based on its years of production and R&D experience.
1. Install the pump at an angle and reduce bends. Install the submersible pump at an angle or turn the volute so that the outlet is directly facing the water pool.
2. Shorten the pipeline. Removing 1 meter of steel pipe can save 0.21 kg of diesel in 10 hours.
3. Increase the diameter of the outlet pipe. Replacing a 4-meter-long 10cm outlet hose with a 15cm pipe can save 0.5 kg of diesel in 10 hours.
4. If the water intake can remain clean, the filter screen can be removed.
5. Replace the wear rings and adjust the axial clearance. Prevent improper impeller wear rings and axial clearance; adjust according to the pump's factory instructions during use.
6. Remove blockages in the pipeline promptly. Foreign objects remaining in the intake pipe, impeller, or guide casing will reduce the water output.
7. Prevent air from entering the submersible pump. If air enters the pump, the water output will significantly decrease. Check and maintain all sealing parts.
8. Using a coupling for direct drive instead of a flat belt can improve transmission efficiency.
9. Eliminate "high-angle artillery" style outlet pipes. This type of outlet pipe increases energy consumption.
These are several techniques that can promote energy conservation and emission reduction for submersible pumps. Hopefully, this will provide some help to the pump valve industry in reducing consumption.
Related Information
Contact us
Email:
zxy_ytby@163.com
Phone:
+86 15127281888
Address:
East Zone, Economic Development Area, Boye County, Baoding City, Hebei Province
Phone:
Tel:
Address:
East Zone, Economic Development Area, Boye County, Baoding City, Hebei Province
Email:
AICAIGOU
Hebei Longmai Pump Industry Co., Ltd.